What are the operating procedures for pushing table saws?

1. Before starting the machine, you must carefully check the saw blade pad and the compression nut and the screws at all parts. If it is loose, it should be tightened in time. When installing the saw blade, pay attention to the cutting direction and irreversible. 2. Precision table saws do not allow the saw blade to work without a protective cover. 3. When the precision push table saw is manually fed, the wood must be placed close to the workbench and positioned against the board. The hand should not be too close to the saw blade. It is strictly forbidden to process wood that cannot be controlled by the hand. 5. Before processing, the wood should first check whether the wood is sawed at the place where there are nails, sandstone, joints, etc., in order to prevent damage to the saw blade and the joints flying out and hurting people. 6. The precision push table saw can't stand in the cutting direction, and the operator should pay attention to safety when collecting wood. 7. When cleaning the machine, wiping the lubricant, removing the saw blade and removing the sawdust, the power must be turned off. 8. When the precision push table saw fails, the power should be cut off immediately, and the operation should be stopped. The repair and adjustment should be carried out by a special person, and the machine tool is not allowed to operate with faults.